Microbrewery
пивоваренных
12/03/2019
2bbl brewing system
2BBL brewing system
05/03/2019
Microbrewery

Microbrewery

A microbrewery or craft brewery is a brewery that produces small amounts of beer, Such breweries are generally characterized by their emphasis on quality, flavor and brewing technique.

The micro-brewing movement began in the United Kingdom in the 1970s. After centuries of spread, the booming landscape in the United States, garages, basements, and fire-fighting buildings provided a maddening space for micro-brewing.

Almost everyone agrees that breweries producing less than 12,000 hl (about 10,000 US barrels) seem to fit the description. Whatever you use 2mm thick red copper cladding brewhouse or 3mm thick SUS 304 or 316 brewing system in a pub, bar, small factory, those all belongs microbrewery .

Microbrewery

Microbrewery

Brewery SystemComponentsCapacitySpecifications
Crushing systemMiller250kg-500kg/hAdjustable double roller,
BrewhouseMLT1. Brewhouse vessels can be customized.: 2/3/4 vessels.
2. Heating way can be customized: electric heating, steam heating and direct fire heating.
BWT
Water SystemIWTUse for wort cooling, Fermenter and BBT
ChillerUse for IWT cooling, R404A
HWTUse for mashing water
Fermenting systemFVDimple plate jacket for cooling, Manhole in the side.
BBTCarbonation stone for fill Co2, Make beer clearly.
Control systemDigital displaySquare tableEach square table corresponds to a control part
PLCinstrument panelControl all tank’s temperature, motor, pump show on/ off
Cleaning systemCIP carCleaning all tanks buy Alkali and disinfectant
VoltageCustomized
Optional1. Auger system/ Hopper/Grist Hydrator.
2. Beer bottle machine, Beer keg machine.

Crushing system

Crushing system

Crushing system

  1. Our roller is Groove roll ,which is designed specifically for barley malt .So the barley powder content is very low, broken but not powder;
  2. All stainless steel to ensure that there is no rust,, also better impact resistance.
  3. Using a unique device to control the roller space, so you can crush the malt into moderate size.
  4. Using U-type motor base, to ensure the smooth operation for the whole mill equipment, with low
  5. Using the composite gear drive technology, with automatic lubrication, do not need to add lubricating oil for the gear, wear resistance, low noise.
Microbrewery

Microbrewery

Mash / Lauter Tnak :

  1. Inner-tank thickness: 3mm, SUS304 materials; Inner surface treatment: polished to Ra 0.2- 0.4μm;
  2. Outer-tank thickness:2.0mm,Red copper materials;
  3. All tanks are overall polished and better treatment.
  4. Insulation: 80mm polyurethane.
  5. Feeding method:Top manhole for raw materials.
  6. Spray wash ball :360° covering CIP spraying ball.
  7. Temperature sense probe thermometer.
  8. Side manhole for taking out the malt residue.
  9. With rake knife and Agitator motor.

Kettle / Whirlpool tank

  1. Inner-tank thickness: 3mm, SUS304 materials; Inner surface treatment: polished to Ra 0.2- 0.4μm;
  2. Outer-tank thickness: 2.0mm,Red copper materials;
  3. All tanks are overall polished and better treatment.
  4. Insulation: 80mm polyurethane.
  5. Feeding method:Top manhole for raw materials.
  6. Spray wash ball :360° covering CIP spraying ball.
  7. Temperature sense probe thermometer.

Hot water tank

  1. Inner-tank thickness: 3mm, SUS304 materials; Inner surface treatment: polished to Ra 0.2- 0.4μm;
  2. Outer-tank thickness:2.0mm,SUS304 materials;
  3. All tanks are overall polished and better treatment.
  4. Insulation: 80mm polyurethane.
  5. Feeding method:Top manhole for raw materials.
  6. Spray wash ball :360° covering CIP spraying ball.
  7. Temperature sense probe thermometer.

Water System

Water System

Water System

  1. Materials: SUS304.
  2. Inner thickness: 3mm; Outside thickness:2mm.
  3. Insulation:PU; Thickness: 80mm.
  4. Working temperature:-30 to 20 ℃.Temperature
  5. measurement: Platinum resistor or Using direct reading type thermometer fittings
  6. Polyurethane insulation: 100mm.
  7. Feeding method: Ethylene glycol or alcohol water fill into the tank from the top manhole. Refrigeration water fill into ice water tank from the top manhole.
  8. Discharging method: Ethylene glycol water discharge from the bottom of ice water tank ethylene glycol outlet. Refrigeration water discharge from the bottom of ice water tank refrigeration water outlet.
  9. Chiller cool the water in the ice water tank

Fermenting System

Fermenting System

Fermenting System

  1. Inner-tank thickness: 3mm, SUS304 materials; Inner surface treatment: polished to Ra 0.2- 0.4μm;
  2. Outer-tank thickness:2.0mm,SUS304 materials; All tanks are overall polished and better treatment.
  3. Insulation material:PU;Thickness: 80mm.
  4. Cooling liquid: Ethylene glycol or alcohol.
  5. Pessure: Working pressure 0.2 – 0.6 Mpa.
  6. Cleaning System: CIP washing balls.
  7. Cooling way: Cooling jacket with ice water belt
  8. Cooling media: Glycol or alcohol water
  9. Top manways or side manways .
  10. Conical degree:60° or based on the client’s requirements.
  11. Welding process: Argon gas protection welding.

Control System

Control System

Control System

  1. Simple operation, easy maintenance.
  2. Cabinet material: stainless steel.
  3. Function: Show brewhouse tanks temperature, turn on/off all motors and pumps by button, control all fermenting parts temperature, chillers soft start

Cleaning system

Cleaning system

Cleaning system

  1. Material is SUS304 Thickness is 2mm
  2. With heating elements
  3. Material all adopt the international standard of 304 stainless steel, all welding are argon protection single-sided, double-sided forming.

发表评论

您的电子邮箱地址不会被公开。