BEER-KEG-WASHING-AND-FILLING-MACHINE4
beer keg washing and filling machine equipment
2018-05-30
Beer keg Washing and Filling Machine
Automatic beer keg washing and filling machine
2018-05-30

Beer keg Washing and Filling Machine

Matching ParameterThree pumps. three tank without insulating layer
Tank ParameterThree tank,single tank 100L without insulating layer
Heater WaySteam heater in two tanks( caustic and hot waterThe table can rise or notNo
Tank Insulating LayerNo
Spear TypeA,S,D,M OR G ONE OF THEMFilling Part With Flowmeter Or NotNo
Power380V 3phase 50Hz 15KWAccording To Customers Power Standard
Size(L*W*H)1.65*1.60*2.25M                          package: 1.85*1.75*2.50MPackageComposite Borad Box
Equipment explaination

1. It is use the Siemens S7-200 controller and Schneider buttons and knobs.

2. Separate pipe systems of keg washing part and filling part. It own steam sterilize that is suit for stainless steel beer keg and also has acid neutralize function.

3.  Fill way is invert.The machine will stop until full.

4. You can clean all pipe with CIP system on filling part.

5. The whole machine use the stainless steel AISI304. All pipe welding use orbital welding system. Pipe inside and outside are clean and sanitation. Washing working procedure:

Pressing→air blowing/drain off→water washing→air blowing/drain off→hot caustic washing→air blowing/to caustic box→hot water washing→air blowing/drain off→Acid washing→air blowing/to Acid-water box→hot water washing→air blowing/ drain off → steam sterilized (air blowing/drain off) →co2 blowing/drain off→co2 pressure preparing→cylinder return Filling working procedure: Pressing→steam sterilize keg spear →open the spear→co2 pressure preparing→filling→close the spear→washing spear surface→drain off→cylinder return