Beer keg Washing and Filling Machine
manufacturing plant beer keg filling and washing machine
2018-05-30
BEER KEG WASHING AND FILLING MACHINE
Beer Filling Equipment Beer Bottling Machine
2018-05-30

Beer Keg Washing and Filling Machine

Matching ParameterTwo pumps. two  tanks without insulating layer,hot water need connect with the other source )
Tank Parameter(Two tanks,single tank 100L without insulating layer, one is caustic tank, the other one is hot water tank.
Heater WayElectrical heaterThe table can rise or notNo
Tank Insulating LayerNo
Spear TypeA,S,D,M OR G ONE OF THEMFilling Part With Flowmeter Or NotNo
Power380V 3phase 50Hz 15KWAccording To Customers Power Standard
Size(L*W*H)1.23*1.60*2.03M                          package: 1.40*1.75*2.25MPackageComposite Borad Box
Equipment explaination

1. It is use the Siemens S7-200 controller and Schneider air break swtich,,Taiwan AirTAC solenoid valve,pump is Chinese Yuehua, if have flowmeter, we choose German Burkert.

2. Separate pipe systems of keg washing part and filling part. It own steam sterilize that is suit for stainless steel beer keg and also has acid neutralize function. It can use the washing parts to do CIP to filling part.

3.  Use couplers to connect with keg, keep pressure in a keg, no beer lost.The machine will stop until full.

4. The whole machine use the stainless steel AISI304. All pipe welding use orbital welding system. Pipe inside and outside are clean and sanitation. Washing working procedure:

Pressing→air blowing/drain off→Rinse water washing→air blowing/drain off→Caustic washing→air blowing/to caustic box→Hot water 1 washing→air blowing/drain off→Hot water 2 washing→air blowing/drain off→steam sterilized → steam keep pressure sterilized→ →co2 blowing/drain off→co2 pressure preparing→cylinder return Filling working procedure: Pressing→steam sterilize keg spear →open the spear→co2 pressure preparing→filling→close the spear→washing spear surface→drain off→cylinder return


Related Products


  • Hotel-Restaurant-Beer-Brewery-Equipment
    Date
    2020-05-13
    FAQ No1. Is your company a factory or trading company? a manufacture focuing on technology and quality. No2. About the production capacity. The capacity is for per day prodcution, we can give you some suggestions about the quantities and capacity of fermentation tank according to your daily product No3. Can you produce as specific size? Yes, most of our Brewing kits products can be customized. Your satisfaction is our biggest pursuit. No4. About the packaging and shipping: The beer equipment we […]
  • Jacketed bright tank for 2
    Date
    2020-05-12
    Production Process 1 Deep drawing: Special drawing presses are used to produce highly accurate, precision-dimensioned, smooth-surfaced deep-drawn parts from circular blanks. 2 Forming: Technical crimping of beads in the cold-formed keg halves. Cutting the keg halves. Making the bunghole in to half of the keg. 3 Welding in the necks: The necks are automatically welded in the top keg halves using a special method. 4 Embossing and labeling: Customer-specific data are embossed or stamped on the kegs […]