Beer fermenter | - Design pressure:45psi(3bar);working pressure 15psi(1bar);
- Interior and exterior finish bright polish 0.6-0.8 hygiene sueface ;
- 4 304 stainless steel legs with leveling footpads;
- 60° degree cone bottom. other angles can be specified during the design process;
- combine drain exrensions and beer port in cone are standard;
- 20% headspace, unless a differient volume is required;
- Top many wanway or side manway door;
- Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet;
- Polyurethane insulation thickness 80mm for cooling jacket on side and bottom;
- Fully welded exterior shell;
- Non welding CIP arm and rotating 360 degree reach spray ball;
- Solenoid relief valve, pressure relief valve (safe valve) are standard;
- Pressure guage;
- Temperature sensor shell;
- Sanitary sample vale and port;
- All clamps and gaskets to attach all accessories;
- Tank complete with pipingm fittings, sanitar valves and all parts;
- Carbonation port is available for special request (stone not included);
- Ladder hooks is available for special request;
- Dry hop pots and hop bag hooks in any fermenter of any size for special request;
- If you are would like to change , add , remove or modify any paet of the tanks, we can accommodate that. Specific fitting sizes, changes and locations will be set during the design process after a deposit it is taken.
|
Fermenter technical note | - The main material of craft beer fermentation tank 4 stainless steel sanitary;
- An upper stainless steeel dished head, the lower conical or dished bottom head to facilitated the discharge of yeast, 100% TIG welding, clean and polish;
- 3-4 stainless steel tripod for the micro beer fermentation tank, height and level can be adjusted
- sttaibless steel inner wall thickness 3mm, heating preservation polyurethane foam, insulation thickness of 60-100mm, the thickness of the outer foreskin 2mm;
- Cleaning the inner surfaces of the craft beer fermentation tank, polished to 0.4μm;
- Configuration the appropriate standard models sanitary clamp type connector according to the specifications of the tank;
- Configuration the vacuum valve / pressure relief, pressure gauge, thermometer, sampling valves, lifting lugs, side or top of the manhole, a full range of cleaning equipment CIP nozzle 306° fo the beer fermentation tank;
- Double glycol cooling takeover import and export, the refrigerant jacket is welded honeycomb Maitreya plate;
- With liquor outlet valve shaft
- Standard clamp-type hops added port;
- Electronic thermometer sensor interfaces.
|