300l fermentation tank

Interior Finish: Sanitary 2B finish, Pickled and Passivated; (8K Mirror finish optional)

Exterior Finish: Oil brushed finish(2B, 8K Mirror finish optional)

Insulated with high density Polyurethane foam; TH=80mm

Glycol Jacket: Dimpled plate on cone and side

Dished head and 60 degree cone bottom

Sanitary side mounted manway with pressured door

TC connected CIP arm with 360° coverage spraying ball

CO2 blow-off arm with butterfly valve

Full sanitary metallic sealed sampling valve

Mechanical safe valve PVRV 2 bar on CIP arm

Hydraulic shock pressure gauge on CIP arm

Rotating racking arm and port on cone with butterfly valve

Tri clamp discharge arm with butterfly valve

Thermowell for high accuracy temperature sensor

4pcs completely SUS304 heavy duty legs with leveling pad and legs support

Dry hopping port 4” TC with solid end cap

Spundding valve. It works well at the primary fermenting period to release the exta pressure inside fermneter.
Carbonation stone: Help you do beer carbonation, thus the fermenter becomes unitank.
Level tube: this is equivocal design. some brewers like it to see the beer level, while some hate the hard cleanring it takes.

No.	Item	Introduction
01	Volume	200L
02	Dimention	860*2000mm
03	Material	Stainless steel 304
04	Insulation	Polyurethane, TH: 80mm
05	Fermentation tank	Glycol jacket: Dimpled jacket on the cone and side Or single wall with jacketed,or single layer fermentor.
06	Head	Double or single dish head on the top
07	Accessories	Sample valve, pressure gauge, solenoid valve, pressure relief valve, racking arm, CIP arm and Blow off arm, dry hops port and so on.